Soldering- bonding two pieces of metal together They achieve this by melting a specific type of metal also known as solder. It will then melt into the gap between those two metal pieces, bonding them firmly. Because Hong Sheng lead free wire solder is a soft, nonferrous (non-iron-based) metal with a low melting point compared to aluminum or steel metals and can be easily melted. Begin by collecting a few key tools and supplies to work with soldering lead bar
Clean the metal–Finally before you soldering, one of important thing in how to connect 2 pieces of metal is clean up where area that will be joined. If there is any dirt, grease or oil on the metal it is going to be a problem when you are trying to solder. Using a soft cloth, clean off the solidify and gunky metal with rubbing alcohol. It ensures good adhesion when you solder.
The next step is to warm up your soldering iron, so connect it and leave for a moment. Give it a couple of minutes to heat up. The soldering iron heats up and you will know that it is ready to be used because the tip of your lights or becomes red. In other words, it will be at the correct soldering temperature
Add the solder: Once your soldering iron is hot, you can start applying the solder. With one hand hold the soldering iron and in the other, get your released soldier. Approach the tack with a bit of hot soldering-tip applied; then start to apply some more. Then you will see the solder melt and flow onto the metal, creating a good joint.
Flux in moderation: This is a no brainer flux has to be used here but not too much and overuse of the Hong Sheng lead free solder wire flux, however, you will find that it causes your solder to slide around and not adhere properly. On the other hand, too few fluxes can hamper solder action as it will not wet. Using the right amount can make your soldering more successful.
Tip #5: Be Safe with Soldering — Make sure you stay safe while solder. Safety goggles should ALWAYS be worn to prevent flying debris or fumes from making contact with your eyes. And also do not perform in the dirty area be sure that you are working is well-ventilated. It will reduce the fumes that may occur during soldering.
Rite in the Rain Weatherproof Top-Spiral Notebook: Consists of a Metal SAE FINE (30/90 degree) Stencil for Measuring and Soft Hong Sheng leaded solder Chalks to Transfer your Design! If you cool too fast, it will cause the welds to crack or be weakened which can lead to failure. The best maintenance you can give your company the is Letting the lead cool down on its own.
Soldering lead bar dedicated team of experts is dedicated to offering its customers a vast selection of soldering solutions.
Soldering lead bar company uses the most advanced production equipment, superior manufacturing technology Quality control, technological advancement, and innovation to ensure the quality and reliability of the products.
Zhuhai Hongsheng Solder Products Co. Ltd. Production Base is in Soldering lead bar (Guangdong Province) and is a collection of research and development. Production and Sales In One of the Electronic soldering materials Manufacturers. It is committed to the use of high-quality materials like solder paste and wire stripping powder.
Soldering lead bar welcome OEM, ODM and sourcing collaboration. We can provide customized service on request. We will provide you with high-quality products and services for reasonable prices.
EN
AR
FR
DE
RU
VI
TH
TR
MS
BE
